In aluminum hydraulic cylinders, both the piston rod and the hydraulic piston are enclosed within the barrel. This is similar to hydraulic cylinders in other hydraulic systems. But, since they’re aluminum, they weigh less weight than steel cylinders of the same size.
Hydraulic cylinders in general they can be customized to fit into every space. They may be made from various kinds of metals, each of which possess their own distinct features.
What makes aluminum hydraulic cylinders different?
The main differences and benefits of aluminum cylinders lie in their weight. Aluminum cylinders weigh less than steel cylinders, making them ideal for hydraulic applications that require low weight.
Due to their weight, aluminum hydraulic cylinders are easier to move or removed for repairs, maintenance or replacement.
Aluminum hydraulic cylinders are crucial components for heavy-duty operations. They are utilized in a variety of industries ranging from oil and gas to mining railroads, heavy construction and bridge construction.
Hydraulic cylinders in general are able to be made to fit in any area and also manufactured using a variety of different metals, each of which has distinct, unique advantages.
Aluminum Hydraulic Cylinder maintenance is essential to ensure the longevity and efficiency for your equipment.
Maintenance of your hydraulic cylinders made of aluminium is crucial for optimal performance. Keep an watch on the condition of the rod to look for any signs of pitting, corrosion or wear. A lot of moisture can lead to corrosion, whether it’s caused by the atmosphere or inside the fluid.
If water contamination occurs in the liquid, it may cause a major breakdown of the system or component. Therefore, the oil must be thoroughly cleaned as fast as is possible. Furthermore, corrosion causes wear of seals because of the increased friction. Pitting is a similar issue.
Grease, Oil and Lubricants
Toss the cylinder for 5 minutes using the solution consisting of a small amount of dishwashing soap, hot and soft water. Rinse the cylinder thoroughly with warm soft water. A few rinses are required to wash away all soapy solution.
Repeat the process as many times as necessary. Drying the cylinder thoroughly after cleaning is crucial to decrease the possibility of corrosion happening.
Corrosion and Heavy Soils
Tumble the cylinder using the help of aluminum oxide pellets along with water and dishwashing soap.Always completely rinse the container and then dry it when the tumbling process is completed.
Drying the cylinder completely following cleaning is essential to minimize the possibility of corrosion developing. Be aware that following all cleaning procedures, it is suggested that the cylinder is completely dried to minimize the possibility of corrosion developing.
Odours
After a few minutes, soak the entire interior of the cylinder by baking soda as well as soft water.Make sure that the entire surface is soaked by the solution. After that, clean the cylinder using soft water.
Continue this process with some time of soaking the entire interior of the cylinder using the mixture of water and vinegar. Rinse the cylinder thoroughly by rinsing it with water until any vinegar smell is gone.